How To Maintain Sand Making Machine In Winter?

The winter cold wave hits, the temperature drops significantly,Facing the cold wind and frost, even the hard equipment will sometimes "strike"! 

In order to keep the sand making machine in good working condition when it starts to operate in spring next year, winter equipment maintenance is particularly important. So do you know how to maintain the sand making machine in winter?

(1) Maintenance parts

Bearings, rotors, impact blocks and impellers are the key components of the sand making machine. During the process of crushing materials, they are easily damaged due to greater wear and tear. Therefore, attention must be paid to maintenance, regular lubrication, and the injected lubricating oil must be clean and sealed. It must be in good condition and must be strictly in accordance with the lubricant use standards in the manual.

(2) Replace lubrication and grease

Always pay attention to and timely lubricate the friction surface, which can ensure the normal operation of the crusher and prolong the service life of the equipment. Then, timely replacement of lubricating oil is essential, and it should be replaced with winter gear oil. At the same time, pay attention to cleaning.

(3) Check the power storage and cooling system

When winter comes, pay attention to recharging the battery frequently, so as to keep the motor warm-up. Check the motor wiring of the battery and the density of the electrolyte, increase the charging voltage of the generator, and maintain the motor.

If the temperature in the area where the equipment is used is low, you should choose an antifreeze that is about 10°C lower than the lowest temperature in the area, and it has the functions of anti-corrosion, anti-scaling, anti-freezing in winter, and anti-boiling in summer. cleared away.

(4) Clean up the surrounding area

In the northern region, snow and ice are easy to occur on the production line site in winter. It is necessary to clean the facilities around the mining equipment and clean the snow in time to avoid affecting the normal production of the equipment.

The low temperature in winter is unavoidable. Once there is a problem with the sand making machine the production will be delayed and economic losses will be caused. Careful maintenance is worse than early prevention.

In daily production, the relationship between use, repair and maintenance should be correctly handled, and it is not allowed to use without maintenance or only repair without maintenance, so as to ensure that the crusher equipment is always in a good performance state, and can be put into operation at any time, reducing downtime and extending equipment life.

Service life, so as to ensure continuous and effective production, achieve the purpose of improving productivity and reducing cost input.