Impact Crusher Improvement Of Gear Lubrication

Transmission part of impact crusher adopts high efficiency type narrow v-belt transmission. Cooperate with the spindle of the sheave with bulging tight connection, convenient for installation.

Impact crusher drive can not only improve the equipment performance, but also can serve as protective device, transmission power, and adjust running speed, its significance does not show that the device is perfect, on the contrary, there are still defects need to be improved; lubrication is an important aspect among them. This article from two aspects of improvement scheme and effect, to analyze the impact crusher gear lubrication improvement:

Improvement Scheme:

In order to improve the lubrication effect of transmission device, a lot of manufacturers to take the following two improved methods:

(1) Under the premise of meeting the impact crusher to requirement, developers to design transmission part oil injection lubrication points;

(2) In the gear lubrication system, Shibang machine adopts injection machine lubricating oil way of automatic lubrication, significantly improves the efficiency of the transmission parts of lubrication. Practice has proved that both the improvement of lubrication method is not only simple and practical, low investment and consumption, and it has widely practical value.

The Improvement Effect:

(1) Change the way of lubrication points and lubrication, makes the transmission device maintenance and maintenance more convenient in use, to improve the lubrication effect, reduce the related parts of wear, extend the operating life of the equipment at the same time, reduce the operation cost, f or the user brings tangible economic benefits;

(2) A lot of drive devices are also equipped with mechanical transmission device, the above improvements in gearing has universality and similarities, impact crusher on the successful application of the other equipment transmission device improvement has great significance.

Impact crusher equipment design is novel, the design principle of adopting the new concept of crushing technology, can satisfy the different material specifications of the crusher, fully meet the needs of new technology of "more crushing less grinding" requirements. "Stone while the iron is hot" principle is not only broken than big, and the unit power consumption is low, in the field of mineral processing has been proved by large engineering in the machine has a good application prospect.