The Solution Of Shaking Of Sand Making Machine

In the production of sand making machine, the normal production state is the smooth operation process, but the phenomenon of shaking often occurs due to some reasons. This fault will affect the production efficiency and so on. Therefore, it needs to be solved in time. Here is to introduce its solution.

In order to solve the jitter phenomenon in the production of sand making machine, first of all, we must find out the causes of this phenomenon. Only when we find the reasons, can we solve the problem pertinently. Generally speaking, the reasons for the jitter phenomenon of sand making machine are mainly as follows:

1. The wear and tear of the vulnerable parts on the impeller of the sand making machine is serious, which causes the internal imbalance of the equipment and causes the phenomenon of jitter.

2. The feeding granularity is too large to exceed the maximum granularity that the equipment can bear, and the equipment runs overloaded, which leads to the phenomenon of jitter.

3. The impeller runner has blockage, which makes the feed uneven and oscillates.

The Solution of Shaking of Sand Making Machine

After understanding the causes of shaking of sand making machine, we will introduce how to solve this problem. According to the different reasons, the solutions are different, mainly in the following aspects:

1. Maintain the equipment regularly, check the wear and tear of each component, replace the fragile parts, and balance the impeller inside the equipment.

2. Strictly control the feeding granularity of the sand making machine, which should not exceed the maximum allowed by the equipment.

3. Remove the blockage in the impeller runner and often clean and maintain the crushing chamber.